Pico Battery Pack TA047 for Active Differential Probes

Pico TA047 is a battery pack which accepts 4 alkaline AA / LR6 batteries for supplying 6 V power to TA045 ( 898-6753 ) and TA058 ( 898-6769 ) active differential probes.

Pico Probe Tip to BNC Adapter TA152

Pico TA152 is a useful adapter designed for connecting an oscilloscope probe tip directly to the BNC input of a DUT or source. This accessory is compatible with 2.5 mm scope probes: 350Hz and 500Hz high impedance (TA101, TA133, TA150); 1.5GHz low impedance (TA061 and TA062).

Pico Attenuator Set TA050 BNC 50Ω 1W 1GHz, 3, 6, 10, 20 dB

The Pico TA050 attenuator set consists of 4 coaxial attenuators designed for use with signals up to 1GHz. Each attenuator has a male and a female BNC connector.

Note

TA050 attenuators must be used with a matched 50Ω source and load. If users wish to attenuate a signal before feeding it into a high-impedance measuring instrument, they must add a 50Ω feedthrough terminator such as Pico TA051 ( 898-6791 ).

Bandwidth DC to 1GHz
Attenuation 3, 6, 10, 20 dB
Maximum power dissipation 1W
Input impedance 50Ω
Output impedance 50Ω
VSWR 1.5:1 or better
Dimensions 56 x 20 x 17 mm
Connectors BNC, 1 male + 1 female
Shielded inner box with plastic shell
Weight 24g each

Pico Terminator TA051, BNC Feedthrough 50R 1W 1GHz

The Pico TA051 feed-through attenuator is a coaxial terminator with BNC connectors. It is useful for connecting signals from 50Ω sources into instruments with 1 MΩ impedance inputs, such as oscilloscopes.

Bandwidth DC to 1GHz
Maximum power dissipation 1W
Input impedance 50Ω
Resistance tolerance ±2%
Dimensions 56 x 20 x 17 mm (approximately 2.2 x 0.8 x 0.7 in)
Connectors BNC, 1 male + 1 female
Construction shielded inner box with plastic shell
Weight 24 g (approximately 0.85 oz) each

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Teledyne LeCroy Accessories for PP005/PP005A Series Passive Probes

One of the advantages of using Teledyne LeCroy passive probes is the large number of accessories available from RS for use with these probes. Examples include hooks, adapters, tips and ground leads. These accessories are designed for use with Teledyne LeCroy passive probes PP005 and PP005A.

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Teledyne LeCroy Accessories for PP005/PP005A Series Passive Probes

One of the advantages of using Teledyne LeCroy passive probes is the large number of accessories available from RS for use with these probes. Examples include hooks, adapters, tips and ground leads. These accessories are designed for use with Teledyne LeCroy passive probes PP005 and PP005A.