Transparent hinged cover
Additional protection from accidental operation
Useful in high traffic areas : stairwells and corridors
Reduces nusiance false alarms, seal has to be broken first
All indoor and outdoor KAC call points can be fitted with these covers
Customised branding available
The Keyguard range includes snap-off plastic windows to release keys with or without battery powered inbuilt alarm. Other Keyguard options include volt-free contacts for specialist applications.
Key cases are made of plastic without glass
Snatch off plastic window
Can be wired into existing alarm systems
Stores both keys and cards
Ideal for restricted access areas
The Keyguard plastic window enables it to be used in such areas as schools, food preparation areas and swimming pools
The standard version with no alarm or switch
With an integral audible alarm powered from a PP3 Alkaline battery (supplied)
If any attempt is made to remove the plastic window then the alarm is sounded
The alarm can only be silenced by fitting a new window
The Key guard K1020 are fitted with a single pole changeover contact microswitch (10 A / 240 V ac)
This switch is terminated and is voltage free for connection to users own equipment.
Should only be used at low voltage (12 V dc)
Replacement windows for Keyguard emergency access key box
The Fulleon CXL range of manual call points are designed for use in the event of a fire or other emergencies, by providing occupants an interface to start evacuation procedures, release gas or emergency door release.
The CXL call points are suitable for modern fire systems and come as standard with glass and plastic elements and a reset/testing key. Integrated LED indicators provide increased flexibility for diverse applications.
Easy to install, the back box to this call point system is surface mount and available in a range of colours including red, white, green, yellow and blue. A weatherproof option is also available.
The CXL call points may be fitted with a polycarbonate flap for protection against accidental operation or false alarm in busy areas. Where extra security is needed a breakable plastic tie can be added to secure the flap.
• Manual call point device with break glass operation
• Instantly raise the alarm in the event of an emergency
• Choice of glass or plastic resettable elements (for spare glass element see Stock No. 377-1799)
• Includes reset/testing key
• Changeover contacts
• Potted waterproof option
• Flag on the re-settable element
• Monitoring Resistor
• Superior LED alarm indication
• Suitable for conventional fire safety systems
• Certified to EN54-11
Used in conjunction with the Solo smoke aerosol (425-2889), the dispenser contains the test aerosol and ensures that it is contained and applied correctly.
Compatible with the widest range of detectors, the dispenser enables testing at low level and at heights of up to 9 metres – when used with the Solo range of access poles.
Testing smoke detectors.
1.13 metre extension pole which can be used on it own or as an extension to the Telescopic Access Pole (201-3092).
Access poles provide access to detectors which are out of normal reach. Their use saves time, cost, disruption and risk to safety. The poles are lightweight and quick to extend and are made of non-conducting fibre glass construction.
Designed for use with the Solo aerosol dispenser (201-3137), detector removal tool (201-3121) and both the mains powered (453-0555, 453-0561) and cordless heat detector tester (384-6944).
RS Stock number: 513-6968 are replacement ‘break glass’ parts; RS Stock number: 513-6974 is the KAC test key. Both accessories are for use with MCP Indoor Call Points.
Green MCP, double pole, surface mounted with glass
Break glass operation
Surface mounting
Unique plug and play concept saves installation time
Anti-tamper facility to reduce false alarms
RS Stock number: 513-6968 are replacement ‘break glass’ parts; RS Stock number: 513-6974 is the KAC test key. Both accessories are for use with MCP Indoor Call Points.
Green MCP, double pole, surface mounted with glass
Break glass operation
Surface mounting
Unique plug and play concept saves installation time
Anti-tamper facility to reduce false alarms
4.5 metre telescopic access pole. Access poles provide access to detectors which are out of normal reach. Their use saves time, cost, disruption and risk to safety. The poles are lightweight and quick to extend and are made of non-conducting fibre glass construction.
Designed for use with the Solo aerosol dispenser (201-3137), detector removal tool (201-3121) and both the mains powered (453-0555, 453-0561) and cordless heat detector tester (384-6944).
Non-whip even at height
Certified non-conductive – protecting both the engineer and overhead live equipment from inadvertent shorts
