Valve Actuators – Schneider Electric

Schneider Electric Valve Actuator – MVB56

Created and designed for opening and closing valves, offering users as automated was to adjust a valve. Operated through electricity, which means that this valve actuator can be adjusted remotely. This type of valve actuator will often be used for automation and control purposes within industrial valves, predominantly in process plants and factories. (Wastewater treatment plants, power plants, refineries, mining ect)

Features & Benefits

• This electric actuator provides a solution for applications that include reversing synchronous motors




• An electric board is available




• Versatile, enabling the actuator to be mounted on new Controli globe valves up to DN”2 and other manufacturers range of valves which have a stroke from 10.8 to 20 mm




• Another feature of the valve is provided on this model – an output signal (0…10 V–, 10…0 V– and 0…200 mA) indicating the valve stem position. An internal jumper allows reversing the rotation direction




• Equipped with a manual override




• The actuator is assembled on the manual control and it is possible to connect it to a supervisor or an outside controller to communicate whether the actuator is in “manual” or “automatic” mode. MVB46P model is supplied with 1 KΩ aux

VZBA Series Ball Valve with Pneumatic Actuator

Festo VZBA versatile 3-way stainless steel ball valve for smooth and simple control of aggressive media or gases in piping systems. An ideal solution in complex processes such as, when rinsing two containers at the same time or mixing a combination of essences.

Festo Ball Valve with Pneumatic Actuator

Features and Benefits

3-way ball valve with female thread
Housing operating shaft and ball all made of stainless steel
PTFE ball seal
Temperature range: -10°C … +140°C (depending on pressure)

Pneumatic Actuator with s.64 Ball Valve

RS Pro pneumatic actuator with s.64 ball valve.

Features and Benefits

• ISO 5211 direct mount on valve
• NAMUR pads for direct mount of solenoid and limit switch
• Pilot ring for perfect alignment of shaft and stem
• Extruded aluminium body
• Nickel plated steel shaft
• Stainless steel fasteners
• High tensile long life return springs
• Visual position indicator
• Indoor or outdoor installation
• Single travel stop on one end
• Fast field conversion between double-acting and spring-return
• Minimum ambient temperature while actuator at rest: -35°C